Information

DIY garden paths: a selection of design ideas + step-by-step master classes

DIY garden paths: a selection of design ideas + step-by-step master classes


The first thing that meets us behind the country gate is a garden path leading to the porch. From it in all directions: to the bathhouse, and to the garden, and to the garage - similar paths and paths run up. It is always more pleasant to walk on a solid, well-groomed surface, especially when the grass is damp from rain or clayey soil around. Let's forget about designers and try to make garden paths with our own hands, and for this you only need desire and building material, affordable and inexpensive.

What are garden paths like?

There are no so many classifications - both by material for manufacture, and by location, and by size. We will take a division into views based on the way of the device.

Garden trails

This is a natural view as the paths appear on their own without any special planning. Usually they are trampled by the feet of people or rammed by the wheels of garden equipment and serve to connect the most important points of the site - a house, a bathhouse, a vegetable garden, a garden, a gate. The usual unpaved path has disadvantages (mud after rain, puddles, overgrown with grass), so it is possible only as a temporary option. By the way, the trail can also be improved: it is enough to lay out a curb of cobblestones or paving slabs along the edges.

Garden trails are ideal for areas located in dry areas

Backfill paths

They are easy to arrange: a ditch should be dug, approximately 100 mm deep, geotextiles should be laid along the bottom and edges (density not less than 150 g / m²), and the sides should be reinforced with curb tape. It will remain on the finished base to fill in pebbles, crushed stone, marble chips or screenings. If this option seems simple, you can additionally lay stone or concrete slabs on the surface - in an orderly or chaotic manner. For ease of movement, the slabs should be drowned in the backfill so that they are flush with the surface.

Having picked up gravel or crushed stone of different colors, you can decorate the paths or divide them into zones

Solid fill tracks

The durable cover is ideal for heavy loads. Paving of garden paths takes place on a concrete base with further laying on it of decorative elements: tiles, paving stones, natural stone. The use of materials of different colors gives the decor a natural look. It is better if the finished object will rise 50-70 mm above the ground - this will save it from erosion by water and soil sediments.

Slab or stone paths laid on a concrete base are reliable and durable

Use of wood cuts and bars in work

A budgetary and favorite option for summer residents is wooden garden paths. The most popular are two types:

  • using wooden blocks;
  • from wood cuts.

If the climate is dry rather than humid, you can use wooden blocks or thick planks, which are easy to obtain at any building supermarket. Better to stay on hardwoods. Equal pieces are cut (100 cm long, 30 cm wide and 15-20 cm thick) and placed on a prepared base - gravel or sand.

Each bar should be treated with fuel oil or a special compound that protects against moisture and decay. For the same purpose, liquid asphalt is applied to the underground part of the bar, and sometimes a standard sand cushion is arranged. It is better to lay such combined coatings in the fall, since in winter the soil subsides, due to which natural tamping occurs.

For paths made of wooden blocks, it is better to use fine gravel or crushed stone

Using cuts of different sizes and colors, you can create unique track variations

Old fallen trees in the country are a real find for craftsmen. By sawing the trunks into pieces, from the resulting elements - cuts - you can make wooden garden paths that look equally good when crossing the lawn or winding among flower beds. Not only trunks will be used, but also thick branches, with cuts from which it is convenient to fill the voids between large elements.

Screening strengthens the individual elements, and the geotextile protects the path from the germination of grass

In order for wooden products to serve for a long time, they must be treated with hot linseed oil on all sides; it is better to repeat the procedure twice. A piece of geotextile or polyethylene is placed between the saw cut and the ground.

A short master class on laying paving slabs

With the help of pictures and descriptions, you can imagine how to make paths in the garden from paving slabs - a noble and durable material.

Irregularly shaped paving slabs look more natural than straight ones

For work you will need:

  • wooden mallet;
  • rubber hammer;
  • stakes;
  • Master OK;
  • building level;
  • cord;
  • rake;
  • broom;
  • watering hose;
  • channel;
  • manual ramming.

Materials: paving slabs (50 mm or 60 mm thick), curbstone, crushed stone (fractions 20-50), dry mix for plaster or cement M400 (M500), sand, geotextile.

Now we will consider all the stages of the work. The first step is planning. It includes creating a drawing, choosing a stacking scheme and shape of curly elements, choosing a color (or several colors). At the same time, they calculate the number of tiles (including spare ones) and the consumption of the rest of the material.

There are many schemes for laying paving slabs based on the alternation of products of different colors.

Next, we do the markup. Precision of action is one of the conditions for correct styling. A tape measure, pegs and a cord will help define the boundaries of the work. Sometimes it is necessary to walk along the proposed path in order to understand how it is more convenient to lay it.

For the device of a path from paving slabs, the accuracy of the marking and the sequence of work are important.

After marking, it is necessary to prepare the base. First you need to cut the top layer - sod to a depth of 20 cm. If the soil is clay, drainage will help. Then you should create a sand or gravel bed and a cement (concrete) screed.

A multi-layer base under the tiles is necessary so that the track is strong, does not settle and does not wash out with water

Geotextiles can be laid between layers of sand and gravel, making the structure more durable. The top layer is a dry mix purchased from a store, or a self-prepared mixture of sand and cement. A layer of mixture (3-4 cm) should be leveled with a rake and a channel.

Even distribution of the cement mixture is carried out using a conventional garden rake.

The channel for leveling the surface can be replaced with a regular wooden beam

Now we are laying the tiles. Laying direction - away from you, so as not to spoil the base. Products should fit tightly, but with a gap of 1-2 mm. Each tile must be tamped with a wooden mallet. Finally, check with a level and trim with a rubber mallet. First, the whole elements are laid, and only at the end the paving slabs are cut and the missing pieces are laid.

For high-quality laying of paving slabs, simple tools are needed - a rubber hammer and a wooden mallet

For the convenience of laying, first of all, whole products are placed, leaving voids at the edges

The voids along the curb are filled with pieces of tiles of the required size

A border is laid out along the edges, fixed with M100 solution and covered with sand. The seams between the individual elements are covered with a sand-cement mixture, which is then moistened with water from a hose. Add the mixture to the places where it subsided, and repeat the watering. After 2-3 days, the track will be finally ready.

DIY cement paths for garden

7-part video instruction for working with ready-made forms

Natural stone paths: durability for centuries

Spectacular stone garden paths can be made from material left over from the construction of a house or home decor, for example, an alpine slide. The picturesque paths are created by the uneven shape and different sizes of stones.

To create a beautiful path, stones of different sizes and colors are suitable.

The first step is to calculate the number of large stones. To do this, they can be laid along the future path. The basis for laying is a cushion of sand poured into a shallow ditch directly on the ground.

It may be necessary to process the stones to join them. A grinder or a more serious tool will help. There are two ways to arrange the finished material: in the form of a pattern (relief, mosaic) or in a chaotic manner, alternating large stones with smaller ones. If you do not hammer the joints between the stones with a cement mixture, after a while they will be overgrown with grass. This option is also possible, it looks more natural.

The diagram shows the approximate thickness of each layer, which should be adhered to during installation.

A combination of different types of stones and plants - an example of a path suitable for a Mediterranean-style site

Stone paths and paths are appropriate when creating a landscape painting of any style.

A modern touch - the use of plastic modules

If there is no time to build a solid stone or tiled covering, but there is a desire to quickly install paths in the garden with your own hands, you can use a temporary option - garden plastic paths. Ready-made modules, most often the same size and color, are sold in the store.

The color of the plastic modules is chosen depending on the area on which they will be laid. Most often these are green or black products.

In addition to the low cost, plastic tracks have other advantages:

  • retain their shape and appearance for a long time, wear out slowly;
  • have holes so that water does not accumulate and go into the ground, that is, they do not form puddles and do not create a smell;
  • plastic is practically not rotting;
  • do not require constant care and attention, they are well cleaned and washed with water from a hose;
  • resistant to chemical attack;
  • quickly assembled and assembled according to the principle of a constructor;
  • they are equally easy to fit on any base - sand, turf, clay.

At the end of the summer cottage, plastic modules are dismantled, washed, dried and stacked in a utility room until next year.

Plastic paths are a good option for creating temporary paths on lawns

Paths at the summer cottage are created not only for practical use, but also for decorating the territory

In addition to the listed options, there are other types of garden paths - brick, from parquet boards, from concrete blocks, as well as all kinds of combined options. The basic rule for choosing material for the track: it should be combined in texture and color with the house and other buildings.

  • Print

Rate the article:

(12 votes, average: 4.5 out of 5)

Share with your friends!


DIY garden paths: drawings and design options

The cleanliness and beauty of the personal plot, as well as the cleanliness in the house, gazebo and other rooms and recreation areas, depends on how correctly and conscientiously the garden paths are executed. Why do they deserve such close attention, because they perform not only an aesthetic and decorative function, but also a hygienic and practical one, and also unite the entire site into a single harmonious whole.

  • We plan carefully
  • Examples of brick garden paths (video)
  • Follow the rules
  • Preparatory work
  • Base of the track
  • Varieties of garden paths
  • Brick path
  • Round timber path
  • Wooden paths
  • Unique path made of smooth river stone
  • Garden path made of natural stone
  • Garden paths made of paving stones
  • Concrete garden path
  • Garden path from paving slabs
  • Gravel garden path
  • Garden paths in landscape design
  • Examples of ready-made design solutions (video)
Show all content

Content

Tracks made of beams or planks

You can simply put unplaned boards on the ground across the movement at a small distance from each other. It’s okay if it’s not very even. The gaps between the boards can be covered with fine gravel or earth. Over time, grass will begin to grow between the boards, and the paths will become even more scenic.

If you do not like the rustic style, and you want the wooden paths to look nobler, it is better to dig a trench along the width and length of the future path, lay a geotextile bedding on its bottom, cover it with a layer of sand, level it, lay a layer of rubble on the sand, then again a layer of sand and only after that lay out the path with wooden boards and fill the gaps between them with sand or gravel.

You can first lay concrete blocks on the ground, and already on them - boards: the path will rise slightly above ground level and will last longer. And it will look unusual and attractive.

Paths from wooden saw cuts

The paths paved with discs obtained by sawing a tree trunk look stylish. But first, at the site of the planned path, you need to dig a trench, cover it with geotextiles, lay a layer of sand on it and tamp it well. Then the discs are laid out along the path, and the gaps between them are covered with sand, gravel or small stones.

Garden paths made of wood chips

This method is simple and not at all costly, but the result is excellent: the paths look decorative and, in addition, not a single weed will break through the chips. As in other cases, first, a shallow trench is made along the length and width of the garden path, curbs of stone or brick are laid out along its edges, the bottom of the trench is covered with sand, tamped, and then filled with chips.

True, from time to time you will have to add chips to the track, because over time this filler sags and cakes.

There are other ideas on how to make garden paths out of wood. You will learn about them from the following video:

Garden paths made of stone

Stone paths look expensive and very reliable. They will not only fit into any interior, but will undoubtedly decorate, refine it and will serve much longer than wooden ones, without losing their decorative effect over time. Lay flat stones on an earthen pad, pressing them into it, but if you put stones on a cement mortar, the path will be stronger and more durable. But under such a path, you must first dig a trench.

You can remove a layer of turf 20 cm thick at the site of the future path, install a low curb of stones or metal plates on the sides, pour and level sand along the bottom of the trench, cover it with geotextiles, and then fill the trench with small pebbles, stone screenings or gravel.

Brick paths

Wonderful paths are obtained from paving stones or bricks, because this building material can be laid out in different geometric patterns, like parquet. Prepare a trench, limit it around the edges with boards set on an edge, tamp along the bottom first a layer of rubble, then a layer of sand, and lay bricks on the sand and press them. Fill the gaps between the bricks with gravel or sand.

Concrete garden paths

Concrete walkways are strong, durable, comfortable, and most importantly - neutral. This means that they will be in place for any design solution to decorate the garden. You can easily remove the top layer of earth from the place where you plan to lay the path, install formwork along the edges of the future trench, scatter rubble along the bottom, level it and fill it with concrete.But some people prefer to be creative in the production of concrete paths and use a special plastic mold for pouring. The result is a concrete mosaic, as if paved from small-sized slabs of various shapes. However, under such a path, it is better to lay not crushed stone, but sand:

If you are not constrained in funds, you can lay out paths from commercially available paving slabs. Such paths will not be cheap, but you can save money by laying the paving slabs with your own hands.

Under such a path, it is imperative to cut off a layer of turf 20 cm thick, then lay a cushion of sand or rubble on the bottom of the formed trench and make a concrete screed over it.

As soon as the concrete dries, geotextiles are placed on it, which will give the structure strength, and a dry mixture is poured on top of it - ready-made, from a store, or made with your own hands from cement and sand. The layer thickness should be 3-4 cm. The mixture is leveled, and tiles are laid on top of it.

Plastic tracks

In supermarkets and shops, you can buy plastic tiles, from which you can easily and quickly assemble a track without preliminary preparation - digging a trench, decorating borders, laying and leveling fillers. The plastic is perfectly washable, allows water to pass through, it is easy to assemble and disassemble, so that if necessary, move the track to another place. For the winter, the plastic tiles, which are connected to each other with latches, can be removed to the barn, and in the spring, when the snow melts, they can be easily taken out again, assembled and put where you need a path.

If you have interesting ideas for decorating a garden, share them with us.


DIY garden paths - how from which you can make a beautiful decoration for the garden (90 photos)

The landscape design of a garden area largely depends on how the paths inhabiting it will look like. In case you do not want to order special slabs that are used to build garden paths, you can always do it yourself from scrap materials.

  • Look at the photos of the tracks made by yourself, and you will understand that it is not at all necessary to spend a lot of money on this.

Paths in the country

We will provide you with several options for materials from which you can easily build beautiful paths on your site. To do this, you can take ordinary bricks, as well as round flat elements of a sawn log.

In addition, you can dot the paths with large pebbles, drowning them into the ground for reliability. You can also use special removable paths that are laid out before the summer season and removed for the winter if no one uses the cottage.

Such tracks do not have to be bought at the store, they can be made by hand. There can be a lot of options for the execution of garden paths in the country. But whatever you choose, first it is important to carry out the work, which will become the preparatory stage.

Track design

Use a piece of paper and a pencil or a computer program to sketch out a sketch of your garden plot, the location of buildings on it, or the paths you want.

First of all, paths are needed that will run between the main and not very buildings, since you definitely cannot do without them. Next, outline the secondary paths that will go to the flowerbed, pool or gazebo with a barbecue area.

  1. The further process of how you can make a path with your own hands is to transfer the scheme to your garden plot.

Markup

If you want the tracks to serve you for a very long time, then do not be lazy and set aside additional time and energy for the preparatory stage. If you are using a specific subject to dot a track, it is important to make the correct markings, which will include the material parameters and the duration of all tracks.

In all cases, it is necessary to remove the top layer of earth, in the place of which the paths will be laid. Use pegs with a rope stretched over them so that you can mentally see where the path will go.

Base for tracks

Preparation is of great importance, since such difficulties do not allow the path to disperse with time or sprout with grass. Do not forget about water that can accumulate and destroy your path, make it at an angle and prepare drainage so that the water goes somewhere after the rain.

First of all, on the site of the future track, the first layer is removed, which is about 15-17 cm in depth. Measure every meter with a ruler so that the depth is the same everywhere.

Further, a small layer of sand is poured along the edges of the paths, and boards are installed on top along the walls of the trench to make the path even. Also, instead of boards, you can use curbs that line up at the same height.

In case the walls are crumbling due to soft soil, you will have to use reinforcement that will hold the ground.

The next step in our step-by-step instructions on how to make a path with your own hands is to backfill the bottom of the trench with fine gravel or pebbles, which is mixed with sand. This layer must be carefully tamped. Do not forget to moisten the mixture and tamp it constantly again, as it is necessary to achieve a high density.

Types of tracks

What can you make an inexpensive do-it-yourself track from? The first thing that comes to mind is a brick. This material is very high quality and durable when it comes to using it as a garden path. Laid out in the same way as urban tiles.

For a high-quality and smooth track, you will need high-quality brick. A layer of sand is poured on top of the previous layer, which is subsequently leveled in level.

Round timber

The path made of log cuts looks very aesthetically pleasing and home-like. It is important to use hard woods with an even cut, so you will have to work hard before laying out such a path.

Use logs of different diameters, and the path will take on a mosaic look, and it will be more convenient to build it. Do not forget to treat the wood with a special solution that will protect it from the effects of the environment.

Pebble

Perhaps this is the best idea for how to make a beautiful original track with your own hands. Such a mosaic will delight the eyes of the hosts and amaze guests. You can build patterns using the color of the stone.

  • However, for this option, it will take a long time to prepare the required number of stones that will take to create the path, and it will take a lot.

There are many more types and techniques for laying out garden paths, so do not rush to choose one. Try all the options first in your head, see how and from what other people's paths are made. You can also combine multiple styles for true uniqueness.

Do-it-yourself photo of garden paths


DIY stone garden path

Dear visitors of the site "Visiting Samodelkin" from the material presented by the author, you will tell how you can independently pave garden paths in your summer cottage from stone, paving stones or paving slabs.

Today, most of the summer residents and suburban residents are passionate about landscape design, that is, they ennoble in every possible way, divide into zones, decorate, in general bring warmth and comfort to their 6 acres. One of the main things in garden design is of course the paths, different materials are used for their paving, but the principle is the same everywhere. The first step is to determine the direction and location, then make the markings with pegs and a string. Next, a layer of turf or the top layer is removed on the bayonet of a shovel and the lower part of the groove is aligned with the edges. A gravel backfill is laid on the bottom, and a sand cushion is laid on top, depending on the occurrence of groundwater, that is, if it is close to the surface, then drainage from the gravel backfill is required. And then a stone, paving stone or tile is laid out on a leveled sandy surface.

Let's take a look at what exactly does an author need to pave a garden path?

1.stone
2.sand
3.gravel
4.Board 25-30 mm

Instruments
1.Shovel
2. mallet
3.roulette
4.Sand leveling pad
5.pegs
6.rope
7.vibratory plate

Do-it-yourself step-by-step instructions for paving a garden path from stone.

As already mentioned above, the first thing to do is to mark the future track using a rope and pegs, having previously measured the length and width.




It looks very nice and harmoniously fits into the design of the site. As you can see, laying out a garden path is not so difficult and is quite within the power of a person without experience and special education. And most importantly, you will save money for the family budget, because the services of landscape designers are not cheap. So feel free to take it and do it! Go for it, friends!

This concludes the article. Thank you very much for your attention!
Come visit more often and do not miss new items in the world of homemade products!


Watch the video: Garden Path Ideas Inspirations. DIY Garden Stone and Mosaic Path Design.